Peace Ikpotokin
Modulus of Subgrade Reaction of Soils
The modulus of subgrade reaction ks (also called the coefficient of subgrade reaction of soil) is the ratio between the pressure against a flat...
Effects of Trees on Wind Comfort of Pedestrians
Pedestrian wind comfort can be improved when horizontally incoming airflow passes through trees in the urban areas. This is according to recent research carried...
Design of Pile Cap Using Staad Foundation Advanced
Pile caps are rigid plate structures that are used to transfer superstructure load from columns to a group of piles. They are usually subjected...
IABSE Invites Participants and Calls for Abstracts for Ghent 2021
The International Association of Bridge and Structural Engineering (IABSE) has announced that the IABSE Congress Ghent 2021 will be held from 22 to 24...
Cracking Due to Edge Restraint and Early Thermal Effects in Concrete
Crack width is calculated by multiplying the crack inducing strain by the crack spacing (i.e. the movement over a length equal to the crack...
IStructE to hold Webinar on Structural Uses of Stone
The Institution of Structural Engineers (IStructE) will be organising a webinar on the structural uses of stone. Stones are naturally occurring rocks of igneous,...
Cracking in Concrete
Eurocode recognises that cracking is normal in concrete subjected to bending, shear, torsion, and restraint from movement (clause 7.3.1 EN 1992 1-1). Cracking is...
Minimum Area of Steel for Imposed Deformation Cracking
Minimum reinforcement is provided to ensure that yielding does not occur, and by so doing, cracking is adequately controlled in a concrete section. The...
Detailing of Columns to Eurocode 2
It is important to carry out proper detailing after design of reinforced concrete columns. The requirements for column detailing is outlined in clause 9.5...
Inclusion of women in construction industry
Growing up as a Nigerian from one of the least developed communities, I have identified that our continent Africa and Nigeria in particular has...