8.7 C
New York
Sunday, November 29, 2020
Home Foundations

Foundations

Geotechnical Engineering

Recommended Depth of Exploration for Site Investigation

Ivy Ugorji - 0
Soil is a complex and highly variable product of nature, and the extent of this variation is known in advance. As a result, site...
Read more
Steel Structures

Design of Moment-Resisting Column Base Plates

Ubani Obinna - 1
In the design of portal frames and other steel structures, moment-resisting bases can be provided if large lateral forces and bending moments are anticipated....
Read more
Geotechnical Engineering

Plates on Elastic Foundation

Ubani Obinna - 0
Many problems of practical importance can be related to the solution of plates resting on an elastic foundation. Reinforced concrete pavements of highways and...
Read more
Geotechnical Engineering

Modulus of Subgrade Reaction of Soils

Peace Ikpotokin - 0
The modulus of subgrade reaction ks (also called the coefficient of subgrade reaction of a soil) is the ratio between the pressure against a...
Read more
Foundations

Difference Between Pile Load Test and Pile Integrity Test

Ubani Obinna - 0
Pile foundations are slender structures used to transmit superstructure load to firmer sub-soil stratum beneath the natural ground surface. They can also be used...
Read more
Foundations

Design of Pile Cap Using Staad Foundation Advanced

Peace Ikpotokin - 0
Pile caps are rigid plate structures that are used to transfer superstructure load from columns to a group of piles. They are usually subjected...
Read more
Journals

Modeling of Soils Using Isogeometric Analysis

Ivy Ugorji - 0
Researchers from the Department of Construction Sciences, Lund University, Sweden have presented isogeometric analysis as an alternative to finite element analysis for modelling of...
Read more
Foundations

Massive Diaphragm Wall Reinforcement Installation (Video and Discussion)

Ubani Obinna - 0
A video was recently shared on Linkedin showing a huge and long reinforcement cage for a diaphragm wall being put in place. Please watch...
Read more
Foundations

Design of Pile Foundation System for Bridge Piers

Ubani Obinna - 0
Piles are the most preferred type of foundation for supporting the piers of overhead bridges. They offer greater resistance to vertical and horizontal actions...
Read more
News

Waste Tyres can Improve Seismic Performance of Integral Abutment Bridges

Ubani Obinna - 0
Resuse of about 1.5 billion waste tyres that are produced annually worldwide inspired this research on the behaviour of rubberised backfills for integral abutment...
Read more
Concrete

Construction of Underground Water/Septic Tanks by Sinking

Ubani Obinna - 6
Underground water retaining structures have wide applications in residential, commercial, and industrial buildings. According to Lagos State Development Laws (2005), a building with more...
Read more
Geotechnical Engineering

3D Soil-Structure Interaction of Cantilever Retaining Walls

Ubani Obinna - 0
Retaining walls are structures constructed for the purpose of retaining earth fill. There are different types of retaining walls such as cantilever retaining walls,...
Read more
123Page 1 of 3

Most Read

Guidelines for Tying of Reinforcement

Construction Ubani Obinna - 0
In the construction of reinforced concrete structures, reinforcement bars must be tied together in order to hold them in place and to also facilitate...
Read more

Cost of Reinforcement Works in Nigeria

Construction Ubani Obinna - 1
Installation of reinforcements is an important item of work in the construction of reinforced concrete structures. The cost of reinforcement works therefore significantly impacts...
Read more

Design of Shear Walls

Eurocode 2 Ubani Obinna - 0
Shear walls are structural members that provide additional lateral stiffness to a building by resisting shear, moment, and axial forces, which are produced due...
Read more

Technical Guide: Detailing and Arrangement of Beam Reinforcements on Site

Beams Mubarak Shittu - 3
Beams are horizontal structural elements used for supporting lateral loads. In conventional reinforced concrete structures, beams usually receive load from the floor slab, but...
Read more

EDITOR PICKS

Elastic Analysis of Circular Plates

Slabs Ubani Obinna - 0
A plate is a flat structural element that has a thickness that is small compared with the lateral dimensions. Plates are bounded by two...
Read more

Shear Wall-Frame Interaction in High-Rise Buildings

Frames Ubani Obinna - 0
Shear walls and frames (comprising of columns and beams) are distinct structural systems that can be used in resisting lateral actions in high-rise buildings....
Read more

Effects of Wind on Billboard Structures

Steel Structures Ubani Obinna - 0
Billboards are large outdoor advertising structures that are found along highways and city centres. Due to their large size and flexibility for creative output,...
Read more

POPULAR POSTS

Structural Analysis and Design of Residential Buildings Using Staad.Pro, Orion, and Manual Calculations

Foundations Ubani Obinna Uzodimma - 31
This should be a long post, but I am going to try and keep it as brief as possible. This post is more like...
Read more

PRACTICAL ANALYSIS AND DESIGN OF STEEL ROOF TRUSSES TO EUROCODE 3: A SAMPLE DESIGN

Structural Analysis Ubani Obinna Uzodimma - 28
1.0 INTRODUCTION The most widespread alternative for roof construction in Nigeria is the use of trusses, of which timber and steel are the primary choice...
Read more

Can you identify the cause of failure of this building?

Construction Ubani Obinna - 24
Structural failure is real, and it is the duty of structural engineers to identify all possible modes of failure in a structure, and design...
Read more

POPULAR CATEGORY

ABOUT US

Structville is a media channel dedicated to civil engineering designs, tutorials, research, and general development. At Structville, we stop at nothing in giving you new dimensions to the profession of civil engineering.

Contact us: info@structville.com

FOLLOW US

© (2020) Structville Integrated Services Limited. All rights reserved

error: