9.6 C
New York
Tuesday, February 25, 2020

Ubani Obinna Uzodimma

176 POSTS0 COMMENTS
A dynamic civil engineer with vast experience in research, design, and construction of civil engineering infrastructures. He is a member of the Nigerian Society of Engineers. Reach him at ubani@structville.com

Comparative Design of Triangular Pile Cap with free PDF download

In our post on Structural Aspects of Pile Foundation Design, we showed how we can determine the number piles required to support...

What Engineers and Architects Should Know About Site Instruction

A site instruction is a formal written order given by the heads of a project to contractors or sub-contractors on specific projects issues such...

Structural Aspects of Pile Foundation Design: A Practical Example

Geotechnical engineers are expected to hand over soil investigation report to structural engineers, who will proceed to provide the longitudinal reinforcements needed for the...

Calculation of Collapse Settlement of Collapsible Soils

Civil engineers are always faced with one challenge or another on site, and one of the major challenges on site has to do with...

Structural Analysis of Portal Frames Subjected to Gravity Load

Gravity actions are normally used for verification of portal frames for lateral, buckling, and torsional stability. Elastic analysis and design of portal...

On Consolidation Settlement of Pile Groups

When a group of piles are founded on saturated clays, the pile group undergoes time dependent consolidation settlement. This can be calculated using the...

Analysis of Beams on Elastic Foundation

Introduction When a beam lies on elastic foundation under the action of externally applied loads, the reaction forces of the foundation are proportional at every...

Analysis and Design of Cantilever Retaining Walls on Staad Pro

In this post, we are going to show how cantilever retaining walls can be analysed and designed on Staad Pro software, and also compare...

Manual Design of Beam and Raft Foundation to Eurocode 2 (free PDF download)

In our last post, we considered the analysis of beam and raft foundation of a G+1 building using Staad Pro software. In this particular...

An Investigation on the Analysis of Beam and Raft Slab Using Staad Pro

Modern codes of practice are increasingly recognising the computational power of structural analysis  softwares. Staad Pro is a renowned structural analysis and design software...

TOP AUTHORS

0 POSTS0 COMMENTS
0 POSTS0 COMMENTS
0 POSTS0 COMMENTS
0 POSTS0 COMMENTS
0 POSTS0 COMMENTS
0 POSTS0 COMMENTS
0 POSTS0 COMMENTS
4 POSTS1 COMMENTS
0 POSTS0 COMMENTS
176 POSTS0 COMMENTS
0 POSTS0 COMMENTS

Most Read

Formulas for Calculating Different Properties of Concrete from Compressive Strength

The most basic test done on concrete in most laboratories is the compressive strength test. Sometimes other properties of concrete such as...

Structural Design of Encased Steel Columns

Composite sections of concrete and steel have a lot of advantages especially in the structural performance and fire resistance of a building....

Difference between Autogenous and Drying Shrinkage of Concrete

Autogenous shrinkage is caused by self-dessication in young concrete as water is consumed during hydration reaction. This occurs majorly within the early...

Specification of Concrete for Water Retaining Structures

In the year 2018, we made a successful publication on Analysis and Design of Swimming Pools and Underground Water Tanks. In this post, we...