8.7 C
New York
Friday, March 5, 2021
Home Daily Questions

Daily Questions

Question of the Day | 24-12-2020

The frame loaded as shown above is hinged at point D, simply supported at point F, and fixed at point C. Provide the following...

Question of the Day | 20-12-2020

For the frame loaded as shown above, which of the following is the most likely bending moment diagram due to the externally applied load?

Question of the day | 18-12-2020

For the structure loaded as shown above;(1) What is the bending moment at point B? (take clockwise moment as negative). (A) -4 kNm (B) -2.25...

What is the likely cause of this failure?

Using the only data available from this picture (which is the crack pattern), what is likely caused failure of this structure? The structure is...

What is the cause of the failure of this staircase?

Considering structural design and detailing standards, what do you think is the cause of the failure of this staircase? Read also...Comparative analysis of staircase using...

8 Top Civil Engineering Questions (Part 2)

(1) For the structure shown in the figure below, which of the following is the most likely bending moment diagram considering linear first order...

Advise on the Stability of this Structure

As a structural engineer, advise the client/architect on the stability of the structure, distinguishing between transient and permanent situation.Height - 11.28 mLength - 20.00...

Solution to 25 Top Civil Engineering Questions

Examiner: Structville Integrated Services(1) Mechanics of deformable bodies is usually studied under?(A) Statics(B) Strength of Materials(C) DynamicsAnswer is (B): Strength of Materials is deformable...

25 TOP CIVIL ENGINEERING QUESTIONS

Instruction: Attempt All Questions Examiner: Structville Integrated Services (1) Mechanics of deformable bodies is usually studied under? (A) Statics (B) Strength of Materials (C) Dynamics (2) Which structural model is...

How will you describe this system of forces?

What is the best description that you will give to this system of forces? (a) Coplanar parallel system of concurrent forces (b) Non-coplanar parallel system of...

Is This Ultimate or Serviceability Limit State Failure?

Kindly look at the image carefully, and lend your professional opinion if the failure of the building will be categorized under ultimate or serviceability...

Question of the Day (25/06/2018)

Structville daily questions From now henceforth, Structville will be publishing daily questions on different aspects of civil engineering. You are expected to enter your response...

Most Read

error: