8.7 C
New York
Sunday, March 29, 2020
Home Statically Determinate Structures

Statically Determinate Structures

Analysis of Industrial Gable Frames

1.0 Introduction Industrialization is one of the major keys to development and sustainable economy. Industrial structures are usually very easy to identify because of their...

Analysis of Statically Determinate Compound Frames (Part 3): A solved Example

Question A frame is loaded as shown above. There are internal hinges at nodes B and 2. Plot the internal stresses diagram due to the...

Analysis of Arch-Frame Structure with Tie Element: A solved Example

An arch is supported on frame with different levels of supports as shown above. The frame is supported on a hinge at support A...

Structural Analysis of Determinate Arch-Frame Compound Structure

A parabolic arch structure is hinged on two interacting trusses as shown in the image above. The arch is also hinged at the crown...

Static Analysis of Suspension Bridges: A solved Example

Cables are made from high-strength steel wires twisted together, and present a flexible system, which can resist loads only by axial tension. Use of...

Manual Structural Analysis of Three-Hinged Arch Structures

Arches are important structural elements in engineering that provide economical solutions in both buildings and bridges. In the case of beams supporting uniformly distributed...

Example on the Analysis of Statically Determinate Frames (Part 2)

If you missed the PART 1 of this post, click HERE Problem 1 A statically determinate frame is loaded as shown above. There are internal hinges...

PRACTICAL ANALYSIS AND DESIGN OF STEEL ROOF TRUSSES TO EUROCODE 3: A SAMPLE DESIGN

1.0 INTRODUCTION The most widespread alternative for roof construction in Nigeria is the use of trusses, of which timber and steel are the primary choice...

Analysis of Statically Determinate Frames (1)

In the paper downloadable in this post, the frame loaded as shown above was completely analysed using the equation of statics to obtain the...

On the Deformation of Rigid Frames Using Virtual Work Method

Structures deform when subjected to various conditions such as external loads, change in temperature, differential settlement, or fabrication errors. Deformation is often considered in...

Most Read

Analysis of Wind Load on Bridge Decks

In the design of bridges, environmental actions such as wind, snow, and temperature should also be considered alongside traffic actions. In this...

Important checklists before casting concrete on site

Concreting or casting days are usually big days for site engineers. It is very typical to see engineers and project managers work...

Modeling and Analysis of Spherical LPG Tanks

Spherical tanks are used in several applications such as water storage, nuclear cooling, and storage of liquefied gases such as liquefied natural...

How to build your rate and quote for concrete

In civil engineering construction works, contractors bidding for a job are always required to specify the rate they will use in executing...