8.7 C
New York
Sunday, March 29, 2020
Home Staad Pro

Staad Pro

Analysis and Design of Cantilever Retaining Walls on Staad Pro

In this post, we are going to show how cantilever retaining walls can be analysed and designed on Staad Pro software, and also compare...

Manual Design of Beam and Raft Foundation to Eurocode 2 (free PDF download)

In our last post, we considered the analysis of beam and raft foundation of a G+1 building using Staad Pro software. In this particular...

Analysis and Design of Box Culvert Using Staad Pro

In our last post, we were able to establish how we can load box culverts properly. If you missed the post, kindly follow the...

Loading and Design of Box Culverts to Eurocodes

Introduction A culvert is a drainage structure designed to convey storm water or stream of limited flow across a roadway. Culverts can consist of single...

Comparative Analysis of Cylindrical Water Tanks

Water tanks are usually rectangular or cylindrical in shape. Cylindrical tanks are usually employed for surface or elevated water tanks. Some of the challenges...

Buckling Amplification Factor for Portal Frames Sensitive to 2nd Order Effects

In order to evaluate the sensitivity of a portal frame to 2nd order effects, the buckling amplification factor αcr has to be calculated. This calculation...

How to Analyse Retaining Walls for Trapezoidal Load

In the analysis of retaining walls subjected to earth pressure, it is very common to observe trapezoidal load distribution on the walls. Normally, earth...

Aspects of Modelling of Shear Walls

Shear walls are structural elements usually employed in tall buildings to assist in resisting lateral loads. Shear walls can be solid or pierced (coupled),...

Analysis and Design of Pedestrian Bridge Using Staad Pro

Pedestrian bridges (footbridges) are structures designed to enable human beings cross over obstacles such as busy highways, water bodies, gullies, etc. There are several...

A simpler Approach to the Design of Ground Beams Using Staad Pro

Ground beams are employed in reinforced concrete substructures for a lot of reasons. Ground beams can be differentiated from plinth beams due to a...

Comparative Design of Staircase Using StaadPro and Manual Calculations

Staircases provide simple solutions for vertical circulation in a building. In this post, we are going to model a simple  staircase using finite element...

How to Carry Out Bridge Deck Grillage Analysis Using Staad Pro

1.0 Introduction Grillage analogy presents a sufficiently accurate method of analysing bridge decks for estimation of design bending moment, torsion, shears force etc, and has...

Most Read

Analysis of Wind Load on Bridge Decks

In the design of bridges, environmental actions such as wind, snow, and temperature should also be considered alongside traffic actions. In this...

Important checklists before casting concrete on site

Concreting or casting days are usually big days for site engineers. It is very typical to see engineers and project managers work...

Modeling and Analysis of Spherical LPG Tanks

Spherical tanks are used in several applications such as water storage, nuclear cooling, and storage of liquefied gases such as liquefied natural...

How to build your rate and quote for concrete

In civil engineering construction works, contractors bidding for a job are always required to specify the rate they will use in executing...