8.7 C
New York
Sunday, November 29, 2020
Home Thin plates

Thin plates

Evaluation of effects of temperature difference in storage tanks using Staad Pro

In some factories and industries, tanks are used for the storage of hot liquids which are used in production. In such scenarios, the temperature...

Analysis of Box Girder Bridges Using Staad Pro

A box girder is formed when two web plates are joined by a common flange at both the top and the bottom. The closed...

Manual Design of Beam and Raft Foundation to Eurocode 2 (free PDF download)

In our last post, we considered the analysis of beam and raft foundation of a G+1 building using Staad Pro software. In this particular...

An Investigation on the Analysis of Beam and Raft Slab Using Staad Pro

Modern codes of practice are increasingly recognising the computational power of structural analysis  softwares. Staad Pro is a renowned structural analysis and design software...

Example on Structural Design of Waffle Slab

Waffle slabs can be described as the equivalent of 2-way solid slabs especially when the spans are large, and ribbed system is to be...

Use of Polystyrene in Ribbed Slabs: Structural Design Example

For long span slabs in a building subjected to light load, ribbed slabs are more economical than solid slabs. In ribbed slab construction, reduction...

Comparative Analysis of Cylindrical Water Tanks

Water tanks are usually rectangular or cylindrical in shape. Cylindrical tanks are normally used for surface or elevated water tanks. Some of the challenges...

How to Calculate Crackwidth Due to Bending According to EC2 (Download Excel Spreadsheet)

Cracking is normal in reinforced concrete structures subjected to bending, shear, twisting, axial tension, and restraint from movement. This is mainly due to the...

How to Analyse Retaining Walls for Trapezoidal Load

In the analysis of retaining walls subjected to earth pressure, it is very common to observe trapezoidal load distribution on the walls. Normally, earth...

Aspects of Modelling of Shear Walls

Shear walls are structural elements usually employed in tall buildings to assist in resisting lateral loads. Shear walls can be solid or pierced (coupled),...

Structural Design of Cantilever Slabs – Solved Example

Cantilever slabs are common features in buildings due to the need to have bigger spaces at upper floors. To achieve this, architects normally extend...

Crack Control of R.C. Slabs Using Simplified Rules (Eurocode 2)

The serviceability limit states covered by Eurocode 2 are; - Stress limitation (section 7.2) - crack control (section 7.3) and - deflection control (section 7.4) According to clause...

Most Read

Guidelines for Tying of Reinforcement

In the construction of reinforced concrete structures, reinforcement bars must be tied together in order to hold them in place and to also facilitate...

Cost of Reinforcement Works in Nigeria

Installation of reinforcements is an important item of work in the construction of reinforced concrete structures. The cost of reinforcement works therefore significantly impacts...

Design of Shear Walls

Shear walls are structural members that provide additional lateral stiffness to a building by resisting shear, moment, and axial forces, which are produced due...

Technical Guide: Detailing and Arrangement of Beam Reinforcements on Site

Beams are horizontal structural elements used for supporting lateral loads. In conventional reinforced concrete structures, beams usually receive load from the floor slab, but...
error: