8.7 C
New York
Sunday, September 27, 2020
Home Trusses

Trusses

Simplified Design of Welded Connection to Eurocode 3

In our previous post, we were able to present an example on the design of fillet welds for truss members using two different approaches....

Strength of Spaghetti Bridge Trusses (Video)

Interestingly, uncooked spaghetti has been used extensively to demonstrate the behavior of structures under the action of externally applied loads. Investigations...

Flexural Buckling of Columns

When structural members are subjected to compressive forces, the members may fail before the compressive resistance (A.fy) is reached. This premature failure is usually...

Design of Timber Roof Truss to British Code: Solved Example

The use of timber as trussed rafters for roof of buildings is a very popular alternative all over the world. The aim of this...

Member Design of a 22m Span Steel Roof Truss

Introduction We all need a roof over our head. Nowadays, architects frequently use roof pattern and design to enhance the aesthetics and functionality of a...

Structural Design of Pile Caps Using Strut and Tie Model (EC 2)

Pile caps are concrete mats that rests on piles with adequate rigidity to transfer the column loads to the piles. Piles are provided as...

Analysis of Statically Indeterminate Truss Using Force Method: Solved Example

Introduction Indeterminate trusses are analysed usually analysed using force method or direct stiffness method. In this post, we are going to analyse step by step,...

How to Design Fillet Weld connection for Steel Trusses (EC3)

In modern construction, the commonest methods of connecting steel members are by bolting and welding. Eurocode 3 identifies different types of welding such as; ...

Analysis of Trusses Using Direct Stiffness Method: A Solved Example

An indeterminate truss is supported and loaded as shown above, using the direct stiffness method, obtain the displacements, support reactions, and internal forces that...

Free Vibration of Trusses: A solved Example

Dynamics of structures is a special branch of structural analysis, which deals with the behaviour of structures subjected to dynamic loads (loads that vary...

Most Read

Effects of Diesel Contamination on the Engineering Properties of Natural Soils

Soil contamination is a serious problem and major environmental problem worldwide. Oil contamination of soils can occur as a result of...

Design of Steel Beams for Combined Bending and Shear

It is very common to see bending moment and shear force act simultaneously in structural members. However, when the shear force...

Effect of Impact Load on Lap Length of Reinforcements in RC Structures

Lap length and anchorage length of reinforcements is very important for continuity, strength, and ease of construction in reinforced concrete structures....

Static and Kinematic Determinacy of Structures

A structure is a system of connected parts designed to resist load. Kinematical analysis is very important in the evaluation of...
error: