RECENT POSTS
Don't Miss
Design of Steel Beams for Combined Bending and Shear
It is very common to see bending moment and shear force act simultaneously in structural members. However, when the shear force under consideration is...
Hemp and Recycled Aggregate Concrete
Hemp and Recycled Aggregates Concrete (HRAC) is a sustainable concrete where coarse aggregates are partially replaced with industrial hemp fibers and recycled concrete aggregates...
Question of the Day 09-02-2021
For the cantilever beam loaded as shown above, which of the following diagram combinations will likely give the vertical deflection at point B based...
How to Calculate the Quantity of Mortar (Sand and Cement) for Laying Blocks
Engineers, site managers, and quantity surveyors are always faced with the challenge of specifying as accurately as possible, the quantity of materials needed to...
Partial Replacement of Sand with Waste Glass in Concrete Production
Glass is a transparent or translucent material that is used in the production of materials like sheet glass and container glass. It is manufactured...
Influence Lines
In bridge design, it is very necessary that bridge decks support both static and moving loads. Every component of a bridge needs to be...
Design of Bolted Beam Splice Connections | EN 1993
In the construction of steel structures, there is always a need to join steel members for the purpose of continuity. It is not always...
Finite Element Analysis (FEA) for Structures
Finite element analysis has become an indispensable tool in structural engineering, enabling complex simulations of real-world scenarios through numerical methods. By discretizing a continuous...
Recent Comments